The artificial firmware engineer.

Rake understands your hardware, writes the firmware and brings the board to life.

Rake desktop app with an STM32 firmware project open: the chat identifies the LIS3DSH MEMS sensor from the PCB photos, its SPI1 wiring and the registers to bring it up, with the firmware source beside it.

From schematic to a running board.

A build can pass while the board still fails, so Rake does not stop at the build.

Grounded in your hardware

Answers come from your project, PCB and datasheets, with the page cited.

What sensor is on my board, and how is it wired to the STM32?
RanSearch PCB1 tool | 1 call
RanSearch datasheet1 tool | 2 calls

Your PCB shows U5 = LIS3DSH MEMS sensor, powered from 3V, talking to the STM32 over SPI1 PCB-1.

SignalSTM32 pinSensor pin
SPI1_SCKPA5SCL/SPC clock PCB-1
SPI1_MOSIPA7SDA/SDI data in PCB-1
SPI1_MISOPA6SA0/SDO data out PCB-1
Chip selectPE3SEL/CS PCB-1

SPI1 needs SPE set in SPI_CR1 before the first transfer 3.

Rake's answer to a wiring question: the PCB and datasheet searches it ran, the sensor it found, the SPI1 pins in a table, and the register it cites.

Changes you review before they land

Every edit arrives as a diff. Apply it, discard it, or ask for less.

C main.c › LIS3DSH_Init
336336 {
337337 Error_Handler();
338338 }
339339 LIS3DSH_Write(0x20, 0x67);
340+ LIS3DSH_Write(0x23, 0xC8);
340341}
341342
1 file changed+1-0ApplyDiscard
Cmain.cCore/Src+1
A one-line change to main.c shown as a draft in the editor, with the change set reading one file changed, plus one, and the Apply and Discard buttons.

Build, flash and debug on the real target

Rake drives the probe and debugger, then reads back what the board did.

RanFirmware Build1 tool | 1 call

Build passed. STM32_RAKE.elf, 9.6 KB flash, 2.0 KB RAM.

RanFirmware Flash1 tool | 1 call

Flashed over ST-LINK and verified. Firmware is running on the board.

C main.c › main
52 while (!(SPI1->SR & SPI_SR_RXNE));
53 who_am_i = SPI1->DR;
54
55 while (SPI1->SR & SPI_SR_BSY);
56 GPIOE->BSRR = (1U << 3);
RanVariable ReadSTM32F407 | ST-LINK

Live values from the board, read through the ST-LINK:

ReadValueMeaning
who_am_i0x3FLIS3DSH answers on SPI1
SPI1->CR10x0000035Cmaster, SPE set
SPI1->DR0x0000003Flast byte received

Done. The board is alive.

The build and flash tool rows, the editor paused on a breakpoint at line 55, and the values Rake read back from the board through the ST-LINK.

What it works with.

Targets. Microcontrollers from the major chip vendors, built with toolchains Rake sets up the first time a build needs them.

Probes. Recognised the moment they are plugged in, so flash and debug run without a configuration hunt.

Evidence. Datasheet pages, board facts and live register reads stay attached to every answer.

What ships today.

10

chip vendors in the built-in catalog

50+

microcontroller families Rake already knows

18

debug probes recognised the moment they're plugged in

Bring-up by hand, and with Rake.

Project understanding

By hand

Manual exploration

Navigate folders, read configs

With Rake

Rake maps the project

Source, config, pins, clocks and target context

Driver development

By hand

Hours of coding

Write from scratch or adapt examples

With Rake

Rake drafts the driver

You review the change before it lands

Multi-vendor support

By hand

Multiple IDEs

Different tools for each platform

With Rake

Rake adapts to the target

One workflow across vendors

Debugging

By hand

Specialized tools

Manual breakpoints, flashing and debugging

With Rake

Rake drives the debugger

Ask it to stop, inspect and explain hardware state

Datasheet research

By hand

Manual search

Hours reading PDFs

With Rake

Rake cites the source

Answers grounded in datasheets and project files

Agent integration

By hand

Isolated silos

Copy-paste between tools

With Rake

Rake works on the board

No copy-paste between chat, IDE, flasher and debugger

Frequently asked questions.

Something else?

Contact

Start with your own board.

Not starting today? Leave your email and we write when there is something new to try.

We'll email you about Rake. Unsubscribe any time. Privacy Policy